High Temp Subsystems & TMF – Simton https://simton.co.th จำหน่ายเครื่องมือวัดและทดสอบทางด้านไฟฟ้า และอิเล็กทรอนิกส์ Mon, 05 Jun 2023 06:20:27 +0000 th hourly 1 https://wordpress.org/?v=6.9.4 https://simton.co.th/wp-content/uploads/2026/04/cropped-image-32x32.png High Temp Subsystems & TMF – Simton https://simton.co.th 32 32 Advantage Video Extensometer (AVX) https://simton.co.th/product/advantage-video-extensometer-avx/ Thu, 30 Mar 2023 04:00:15 +0000 https://simton.co.th/?post_type=product&p=4566

Video Product

KEY PRODUCT FEATURES

Extremely Accurate

Up to 0.05 μm resolution

Quick Setup

Quick-attach, pre-defined gage length measurement heads

Innovative Video Capture

Unprecedented speed, accuracy and flexibility for non-contact measurement

Easy-to-use Software

Software calibration verification wizards

FULL PRODUCT INFORMATION

Flexible, efficient and repeatable non-contact strain measurement

Driven by powerful cameras, processors and software, the MTS Advantage™ Video Extensometer (AVX) delivers unprecedented speed, accuracy and flexibility for non-contact strain measurement. The extensometer recognizes patterns on the specimen to acquire measurement data, which is then processed by MTS TestSuite™ TW software to calculate specimen strain and modulus. Calibration verification procedures ensure continuous and traceable data accuracy.

 

Choose from 16 different quick-attach, interchangeable measurement heads that have predefined gage lengths and integrated LED lights. Simply select a gage length and strain range that meets your testing needs, and use the corresponding materials testing measurement head to accurately determine Young’s modulus, Poisson’s ratio, or select R-Value; or use a general purpose measurement head to measure high elongation materials.

 

This AVX can easily be mounted to any mechanical test system, and its ergonomic design includes a magnetic-return support arm for precise, repeatable video capture. The AVX’s magnetic-return support arm swings out of the way for access to the specimen when using a chamber or test area enclosure.

  • Magnetic-return support arm for easy specimen access and precise positioning
  • Quick-attach measurement heads supporting a wide array of gage lengths and strain ranges
  • Pass/fail calibration verification blocks and software calibration wizard to confirm setup to desired ASTM E83 or ISO 9513 class
  • Mounting options on left, right, front or back of load frame

Measurement Head Specifications

XT-100 Series Measurement Heads

AVX Measurement Head

Maximum Axial Tensile Strain Range (%) at Specified Gage Length (mm) 1

Maximum Axial Compressive Strain Range (%) at Specified Gage Length (mm) 1

Maximum Transverse Gage Length (mm) 2

Typical Extension Resolution (µm) 3

Minimum Specimen Width for Measurements (mm) 4

Maximum Tracking Speed (mm /min) 2

Field of View (mm)

 

10

25

50

100

200

10

25

50

100

200

 

 

Axial

Transverse

 

 

XT-101

280

70

-

-

-

40

40

-

-

-

10

0.3

1.5

4

1350

57 x 16

XT-102

530

170

50

-

-

40

40

40

-

-

19

0.4

2.4

7

2100

98 x 27

XT-103

840

300

120

25

-

-

40

40

40

-

29

0.6

3.4

10

3200

150 x 42

XT-104

1000

460

200

65

-

-

40

40

40

-

43

0.9

5

14

4600

220 x 62

XT-105

-

800

360

150

40

-

-

40

40

40

70

1.4

8

23

7200

350 x 100

XT-106

-

1000

500

220

70

-

-

40

40

40

65

1.8

11

30

9400

460 x 100

XT-107

-

-

800

360

150

-

-

-

40

40

-

2.8

16

-

14000

700 x 100

1. Strain ranges assume a distance between the grips of twice the GL, with a centrally positioned gage. Actual strain ranges may be greater or less than these values, depending on gage positioning, grip separation and specimen behavior.

2. Maximum transverse GL and tracking speed is quoted at a measurement rate of 100 Hz.

3. Resolution is based on typical lab performance.

4. For Class B-1, minimum specimen width for transverse gage lengths should be increased by 65%

Note: Working distance is 480 mm.

.

 

XT-200 Series Measurement Heads

AVX Measurement Head

Maximum Axial Tensile Strain Range (%) at Specified Gage Length (mm) 1

Maximum Axial Compressive Strain Range (%) at Specified Gage Length (mm) 1

Maximum Transverse Gage Length (mm) 2

Typical Extension Resolution (µm) 3

Minimum Specimen Width for Measurements (mm)

Maximum Tracking Speed (mm /min) 2

Field of View (mm)

 

10

25

50

10

25

50

 

 

Axial

Transverse

 

 

XT-204

300

80

10

40

40

25

45

0.18

1.0

4.6

250

61 x 51

XT-205

460

145

40

40

40

40

63

0.25

1.4

6.4

350

86 x 72

 

 

 

 

 

 

 

 

 

 

 

 

 

XT-254

390

120

25

40

40

40

15

0.3

1.7

8

1900

76 x 21

XT-255

580

190

65

40

40

40

21

0.4

2.4

11

2600

107 x 30

               

1. Specified strain ranges assume a distance between the grips of twice the GL, with a centrally positioned gage. Actual strain

   ranges may be greater or less than these values, depending on gage positioning, grip separation and specimen behavior.

2. Maximum transverse GL and tracking speed is quoted at a measurement rate of 15Hz (XT-20x series) and 100 Hz (XT-25x series).

3. Resolution based on typical lab performance.

Note: Working distance is 273 mm and is subject to +/- 5% tolerance.

MTS ADVANTAGE™ VIDEO EXTENSOMETER (AVX) BROCHURE

MTS EXTENSOMETER CATALOG

MTS SERVICES _ ACCESSORIES CATALOG

]]> Series 647 All-Temperature Hydraulic Wedge Grips https://simton.co.th/product/series-647-all-temperature-hydraulic-wedge-grips/ Wed, 29 Mar 2023 10:12:58 +0000 https://simton.co.th/?post_type=product&p=4034

KEY PRODUCT FEATURES

Rapid Specimen Changeover

Remote opening and closing allows specimens to be changed quickly

Accurate

Low thermal gradients minimize risk of thermal stress on specimen

Adjustable Pressure

Hydraulic pressure can be adjusted, allowing these grips to be used for testing a variety of materials

Multiple Wedge Selection

A wide variety of wedges are available to meet your testing requirements

FULL PRODUCT INFORMATION

Precision, easy-to-load grips for a wide range of tensile and fatigue applications

Series 647 All-Temperature Grips provide all the advantages of our popular Series 647 Hydraulic Wedge Grips in a design that can be operated within an environmental chamber at temperatures up to 1000°F (540°C). Two models are available: one with a range from –130 to 315°C (–200°F to +600°F), and the other from –130 to 540°C (–200°F to +1000°F). These grips are opened and closed remotely, so there is no need to cool them down before changing specimens. Rapid specimen changeover can be accomplished without touching the hot gripping device. In addition, because the grip head operates within the chamber—at test temperatures— thermal gradients between the grip and specimen are minimized. When these grips are used within an MTS environmental chamber, gradients as low as ±3°F (1.6°C) can be achieved.

As with all MTS hydraulic grips, these provide a constant, adjustable gripping force, regardless of the test loads applied. This consistency prevents specimen slippage or damage to soft specimens during testing. When actuated, all moving parts of the grips are hydraulically locked in place so the specimen can be cycled from full tension to full compression without backlash.

Wedges for these grips are available in many configurations for testing both flat and round specimens. To minimize potential damage to your specimen shaft, you can order our flat wedges with an optional Surfalloy™ finish. This rough, tungsten carbide surface coating provides firm gripping of even the most brittle composites to deliver more accurate, repeatable material characterization.

647 ALL-TEMPERATURE HYDRAULIC WEDGE GRIPS

Specifications

MODELTEMPERATURE
RANGE		FORCE RATING
DYNAMIC		FORCE RATING
MONOTONIC		UPPER WEIGHTLOWER WEIGHTSTUD SIZE
647.02A-31–200 to 600°F5.5 kip7.0 kip31 lb36 lb1/2-20
647.02A-32–130 to 315°C25 kN31 kN14 kg17 kgM12 x 1.25
647.02A-51–200 to 1000°F5.5 kip7.0 kip31 lb36 lb1/2-20
647.02A-52–130 to 540°C25 kN31 kN14 kg17 kgM12 x 1.25
647.10A-31–200 to 600°F22 kip27 kip125 lb142 lb1-14
647.10A-32–130 to 315°C100 kN120 kN57 kg65 kgM27 x 2
647.10A-51–200 to 1000°F22 kip27 kip125 lb142 lb1-14
647.10A-52–130 to 540°C100 kN120 kN57 kg65 kgM27 x 2
647.25A-31–200 to 600°F55 kip75 kip269 lb289 lb1-1/2-12
647.25A-32–130 to 315°C250 kN333 kN122 kg131 kgM36 x 2
647.25A-51–200 to 1000°F55 kip75 kip269 lb289 lb1-1/2-12
647.25A-52–130 to 540°C250 kN333 kN122 kg13

Note: Grip weights would change with different extension lengths. Contact MTS for more information.

Dimensions

Model NumberABC*DEF*
647.02114 mm
(4.5 in)		112 mm
(4.4 in)		267 mm
(10.5 in)		94 to 112 mm
(3.8 to 4.4 in)		66 mm
(2.6 in)		150 mm
(5.9 in)
647.1203 mm
(8.0 in)		160 mm
(6.3 in)		297 mm
(11.7 in)		117 to 132 mm
(4.6 to 5.2 in)		99 mm
(3.9 in)		155 mm
(6.1 in)
647.25267 mm
(10.5 in)		226 mm
(8.9 in)		285 mm
(11.2 in)		142 to 168 mm
(5.6 to 6.6 in)		122 mm

* Note: Other grip extension lengths are available. Contact MTS for more information.

Wedge Selection

GRIP MODELWEDGE SHAPESPECIMEN THICKNESS OR DIAMETER
(VEE)*
INCHES		SPECIMEN THICKNESS OR DIAMETER
(VEE)*
MILLIMETERS		WEDGE DIMENSIONS
A		WEDGE DIMENSIONS
B		 
647.02Flat0 to 0.280 to 7.125 mm (1.0 in)38 mm (1.5 in) 
647.02Flat0.28 to 0.577.1 to 14.425 mm (1.0 in)38 mm (1.5 in) 
647.02Vee0.12 to 0.32/0.373.0 to 8.1/9.425 mm (1.0 in)38 mm (1.5 in) 
647.02Vee0.35 to 0.43/0.608.9 to 10.9/15.225 mm (1.0 in)38 mm (1.5 in) 
647.1Flat0 to 0.300 to 7.645 mm (1.75 in)64 mm (2.5 in) 
647.1Flat0.28 to 0.567.1 to 14.245 mm (1.75 in)64 mm (2.5 in) 
647.1Vee0.23 to 0.40/0.475.84 to 10.2/11.945 mm (1.75 in)64 mm (2.5 in) 
647.1Vee0.43 to 0.50/0.6510.9 to 12.7/16.545 mm (1.75 in)64 mm (2.5 in) 
647.1Flat0.46 to 0.7511.7 to 19.045 mm (1.75 in)64 mm (2.5 in) 
647.25Flat0.04 to 0.471.0 to 11.950 mm (2.0 in)89 mm (3.5 in) 
647.25Flat0.24 to 0.676.1 to 17.050 mm (2.0 in)89 mm (3.5 in) 
647.25Flat0.59 to 1.0215.0 to 25.950 mm (2.0 in)89 mm (3.5 in) 
647.25Vee0.42 to 0.66/0.7810.7 to 16.8/19.850 mm (2.0 in)89 mm (3.5 in) 
647.25Vee0.66 to 0.79/1.0316.8 to 20.1/26.150 mm (2.0 in)89 mm (3.5 in) 
647.25Vee0.25 to 0.40/0.536.4 to 10.2/13.450 mm (2.0 in)89 mm (3.5 in) 

* Note: Other grip extension lengths are available. Contact MTS for more information.

MTS 647 ALL-TEMPERATURE HYDRAULIC WEDGE GRIPS BROCHURE

MTS SERVICES _ ACCESSORIES CATALOG

]]> SilentFlo™ 515 Hydraulic Power Units (HPU) https://simton.co.th/product/silentflo-515-hydraulic-power-units-hpu/ Wed, 29 Mar 2023 08:23:06 +0000 https://simton.co.th/?post_type=product&p=3758

KEY PRODUCT FEATURES

Energy Efficient

New power modules and cooling circuits make this HPU up to 8% more energy efficient than previous models

Cost Efficient

Easy to install pump/motor modules add capacity at a fraction of the cost

Innovative Technology

Remote monitoring and control options available

Quiet Operation

Up to 30 dB(A) quieter than conventional HPUs

MODEL COMPARISON

80514SilentFlo51504mc
Model 515.04
  • Flow rate: 15.1 lpm (4 gpm)
  • Noise level: 57 dB(A)
  • Maximum reservoir capacity: 174 L (46 gal)
70823SilentFlo51507mc
Model 515.07 & 515.11
  • Model 515.07 flow rate (60 Hz model): 26.5 lpm (7 gpm)
  • Model 515.07 flow rate (50 Hz model): 22.7 lpm (6 gpm)
  • Model 515.07 noise level: 58 dB(A)
  • Model 515.11 flow rate (60 Hz model): 41.6 lpm (11 gpm)
  • Model 515.11 flow rate (50 Hz model): 37.9 lpm (10 gpm)
  • Model 515.11 noise level: 60 dB(A)
  • Maximum reservoir capacity: 174 L (46 gal)
70837SilentFlo51530mc
Model 515.20 and 515.30
  • Model 515.20 flow rate (60 Hz model): 75.7 lpm (20 gpm)
  • Model 515.20 flow rate (50 Hz model): 62.5 lpm (16.5 gpm)
  • Model 515.30 flow rate (60 Hz model): 113.5 lpm (30 gpm)
  • Model 515.30 flow rate (50 Hz model): 100.7 lpm (26.6 gpm)
  • Noise level: 63 dB(A)
  • Maximum reservoir capacity: 341 L (90 gal)
73252SilentFlo51590mc
Model 515.60 & 515.90
  • Model 515.60 flow rate (60 Hz model): 227 lpm (60 gpm)
  • Model 515.60 flow rate (50 Hz model): 200 lpm (53.2 gpm)
  • Model 515.90 flow rate (60 Hz model): 340 lpm (90 gpm)
  • Model 515.90 flow rate (50 Hz model): 300 lpm (80 gpm)
  • Noise level: 68 dB(A)
  • Maximum reservoir capacity: 947 L (250 gal)
70810SilentFlo515180mc
Model 515.120 & 515.150 & 515.180
  • Model 515.120 flow rate (60 Hz model): 454 lpm (120 gpm)
  • Model 515.120 flow rate (50 Hz model): 400 lpm (106.4 gpm)
  • Model 515.150 flow rate (60 Hz model): 567 lpm (150 gpm)
  • Model 515.150 flow rate (50 Hz model): 500 lpm (133 gpm)
  • Model 515.180 flow rate (60 Hz model): 681 lpm (180 gpm)
  • Model 515.180 flow rate (50 Hz model): 600 lpm (160 gpm)
  • Noise level: 70, 71, and 72 dB(A), respectively
  • Maximum reservoir capacity: 1893 L (500 gal)

TECHNICAL OVERVIEW

Smaller SilentFlo HPUs

Model 515.04 – 515.30 Specifications
Operating pressure: 21 MPa (3,000 psi)
Pump type: Variable displacement pumps
Filtration: Full flow on the return side
Maximum ambient operating temperature: 40°C (104°F)
Minimum ambient operating temperature: 5°C (40°F)

       
 MODEL 515.04MODEL 515.07MODEL 515.11MODEL 515.20MODEL 515.30 
Flow rates (for 60 Hz models)15.1 lpm (4 gpm)26.5 lpm (7 gpm)41.6 lpm (11 gpm)75.7 lpm (20 gpm)113.5 lpm (30 gpm)  
Flow rates (for 50 Hz models)15.1 lpm (4 gpm)22.7 lpm (6 gpm)37.9 lpm (10 gpm)62.5 lpm (16.5 gpm)100.7 lpm (26.6 gpm) 
Noise level*57 dB(A)58 dB(A)60 dB(A)63 dB(A)63 dB(A) 
Reservoir capacity (maximum)174 L (46 gal)174 L (46 gal)174 L (46 gal)341 L (90 gal)341 L (90 gal) 
Unit dimensions      
Width77.0 cm (30.3 in)77.0 cm (30.3 in)77.0 cm (30.3 in)89.7 cm (35.3 in)89.7 cm (35.3 in) 
Height116.0 cm (45.7 in)120.1 cm (47.3 in)120.1 cm (47.3 in)138.9 cm (54.7 in)138.9 cm (54.7 in) 
Length114.0 cm (45.0 in)114.6 cm (45.1 in)114.6 cm (45.1 in)163.1 cm (64.2 in)163.1 cm (64.2 in) 
Weight with maximum oil508 kg (1,120 lb)522 kg (1,150 lb)544 kg (1,200 lb)862 kg (1,900 lb)907 kg (2,000 lb) 
Motor size11 kW (15 hp)11 kW (15 hp)18.5 kW (25 hp)30 kW (40 hp)45 kW (60 hp)

* Sound levels [dbA] are expressed as a free field value. Readings may vary with acoustic environment.

Specifications subject to change without notice. Please contact MTS for specifications critical to your application.

Larger SilentFlo HPUs

Model 515.60 – 515.180 Specifications
 Operating pressure: 21 MPa (3,000 psi)
Pump type: Variable displacement pumps
Filtration: Full flow on the return side
Maximum ambient operating temperature: 40°C (104°F)
Minimum ambient operating temperature: 5°C (40°F)

      
  Model 515.60Model 515.90Model 515.120Model 515.150Model 515.180
Flow rates (for 60 Hz models) 227 lpm (60 gpm)340 lpm (90 gpm)454 lpm (120 gpm)567 lpm (150 gpm)681 lpm (180 gpm)
Flow rates (for 50 Hz models) 200 lpm (53.2 gpm)300 lpm (80 gpm)400 lpm (106.4 gpm)500 lpm (133 gpm)600 lpm (160 gpm)
Noise level* 68 dB (A)68 dB (A)70 dB (A)71 dB (A)72 dB (A)
Reservoir capacity (maximum) 1,211 L (320 gal)1,211 L (320 gal)2,188 L (578 gal)2,188 L (578 gal)2,188 L (578 gal)
Unit dimensions      
Width 103.4 cm (40.7 in)103.4 cm (40.7 in)103.4 cm (40.7 in)103.4 cm (40.7 in)103.4 cm (40.7 in)
Height 199.4 cm (78.5 in)199.4 cm (78.5 in)199.4 cm (78.5 in)199.4 cm (78.5 in)199.4 cm (78.5 in)
Length 287.0 cm (113.0 in)287.0 cm (113.0 in)430.5 cm (169.5 in)430.5 cm (169.5 in)430.5 cm (169.5 in)
Weight with maximum oil 2,835 kg (6,250 lb)3,289 kg (7,250 lb)4,876 kg (10,750 lb)5,330 kg (11,750 lb)5,783 kg (12,750 lb)
Motor size 45 KW (60 Hp)45 KW (60 Hp)45 KW (60 Hp)45 KW (60 Hp)45 KW (60 Hp)
Number of Motor/pump units 2, max of 334, max of 65, max of 66

* Sound levels [dbA] are expressed as a free field value. Readings may vary with acoustic environment.

Specifications subject to change without notice. Please contact MTS for specifications critical to your application.

MTS SILENTFLO 515.04 HPU BROCHURE

MTS HYDRAULIC FLUID CARE GUIDE

MTS SILENTFLO 515 COMPACT HPU BROCHURE

MTS SILENTFLO 515 LARGE HPU BROCHURE

]]> FlexTest® Controllers https://simton.co.th/product/flextest-controllers/ Tue, 28 Mar 2023 09:24:23 +0000 https://simton.co.th/?post_type=product&p=3520

KEY PRODUCT FEATURES

Accurate

Optimum test data fidelity is achieved with adaptive control techniques, calculated channels, cascaded control loops and RPC interoperability

Versatile

An evolved EtherCAT interface, full-featured 793 software and MTS application software provide the tools needed to address a diverse array of test requirements

Scalable

Industry-proven, modular architecture can be readily scaled to support demands for higher performance, growing test complexity and expanding project volume

Synchronized

FlexTest controllers employ the same internal clock as MTS FlexDAC 20 units to provide the industry's only truly synchronized control and data acquisition solution

MODEL COMPARISON

30734_FlexTest40_mc
FlexTest 40
  • Test stations: 1 or 2
  • Control channels: up to 4
  • Conditioned transducer inputs: up to 12
  • Auxiliary data inputs: up to 16
30706_FlexTest60_mc
FlexTest 60
  • Test stations: up to 4 (or 6 if on/off HSMs)
  • Control channels: up to 8
  • Conditioned transducer inputs: up to 24
  • Auxiliary data inputs: up to 32
30704_FlexTest100_mc
FlexTest 100
  • Test stations: up to 8
  • Control channels: up to 16
  • Conditioned transducer inputs: up to 40
  • Auxiliary data inputs: up to 64
30702_FlexTest200_mc
FlexTest 200
  • Test stations: up to 8
  • Control channels: up to 40
  • Conditioned transducer inputs: up to 80
  • Auxiliary data inputs: up to 96
FlexTest_EP_200_100_60
Elite Performance

FlexTest Models 60, 100 and 200 equipped with significantly increased processing power, which can be used to gain:

  • Higher Channel Counts
  • Increased Computational Horsepower
  • Faster System Rates

TECHNICAL OVERVIEW

Enhanced Processing Power for Evolving Test Complexity

Strategic enhancements to the FlexTest digital system controller platform have yielded significant increases in processing power.

Developed to help test labs address evolving test complexity and demands for increased accuracy, economy and efficiency, new FlexTest Elite Performance Models 60, 100 and 200 are purpose-engineered to deliver:

  • Higher Channel Counts
  • Faster System Rates
  • Increased Computational Capacity

 Maximum System Update Rates

Control
Channels

FlexTest 60

FlexTest 100

FlexTest 200

Standard

Elite Performance

Standard

Elite Performance

Standard

Elite Performance

1-2

6144 Hz

8192 Hz

6144 Hz

8192 Hz

6144 Hz

8192 Hz

3-4

4096 Hz

8192 Hz

4096 Hz

8192 Hz

4096 Hz

8192 Hz

5-8

2048 Hz

6144 Hz

2048 Hz

6144 Hz

2048 Hz

6144 Hz

9-16

NA

4096 Hz

2048 Hz

4096 Hz

2048 Hz

4096 Hz

17-32

NA

NA

NA

4096 Hz

2048 Hz

4096 Hz

32-40

NA

NA

NA

NA

1024 Hz

4096 Hz

40+

NA

NA

NA

NA

NA

4096 Hz

793 Controller Software makes it easy to quickly and efficiently configure a FlexTest controller for a wide range of testing applications. In addition to accuracy-enhancing tools such as adaptive control compensation, calculated channels and cascade control, it features an intuitive interface that facilitates easy definition and control of workspaces across stations, as well as project management tools designed to organize data from complex tests spanning multiple stations and operators. 793 software delivers the advantages of FlexTest controls through any one of MTS' industry-renowned application software packages.


MTS Application Software

  • MTS TestSuite Software features a graphical workflow design interface, modifiable applications and a library of templates for efficiently testing materials and components to industry standards or developing custom tests. 
  • RPC Software provides advanced simulation control, analysis and information management for accurately reproducing the strains, accelerations and displacements of real world service environments on multi-axial component, subsystem or full-vehicle test rigs.
  • AeroPro Software features a tightly integrated control and data acquisition user interface and advanced control loop optimization tools to streamline test set up, simplify the acquisition of high fidelity data, and accelerate even the most complex, high-channel count structural tests.
  • STEXPro Software features a host of innovative simulation tools and an integrated suite of applications for achieving precise control of complex, multi-channel seismic qualification tests and earthquake simulations.
  • MTS Elastomer Test Software comprises a portfolio of tools for quickly designing specific tests or managing libraries of standardized tests for a full spectrum of elastomer testing. 
  • MTS Damper Test Software comprises a portfolio of test creation, run-time and data acquisition, reporting and analysis tools for performing damper performance, durability and quality assurance testing.
  • Multipurpose TestsWare (MPT), the original FlexTest application software, MPT provides the necessary tools to efficiently create and automate any sequence of command generation and data acquisition across a diverse range of testing. 

MTS FlexDAC 20 Data Acquisition Systems employ hardware-based clock synchronization with FlexTest digital controllers controllers to yield extremely high data accuracy. 

It’s critical to know what load level produces a given strain value, however, any skew between controller and data acquisition systems introduces uncertainty into results. Stitching together data ported from different software applications after-the-fact is one major source of skew and post-test uncertainty. MTS engineers have overcome this problem with a hard sync between MTS FlexDAC 20 data acquisition systems and FlexTest digital controllers, using AeroPro software. Essentially, MTS FlexDAC units employ the same internal clock as FlexTest controllers to generate a truly synchronized control and data acquisition stream. This enables a scan of both at precisely the same clock tick with zero skew between applied load and and acquired data. MTS is the only test solutions provider to offer truly synchronized control and data acquisition.

Series 494 controller hardware is the product of more than forty years of advanced test and simulation development and leadership. MTS' fourth generation of digital controllers, the modular 494 platform features easily upgraded centralized processors and test resource boards and a common set of conditioners, valve drivers and I/O modules. This enables test labs to cost-effectively expand controller capacity and extend the productive life of their investment.

Series 494 Hardware includes:

  • 494.96 MVME Processors
  • Mezzanine Cards (1)
    - 494.16 Valve Driver/DUC card
    - 494.21 Multi-Range DUC & Accelerometer Adapter
    - 494.25 Single DUC card
    - 494.26 Dual DUC card
    - 494.45 8-Input A/D card
    - 494.46 8-Output D/A card
    - 494.47 Dual UART/Encoder interface
  • 494.40 I/O Carrier holds mezzanine cards (2)

FlexTest 40

- 494.41 or 494.42 System board
- 494.44 Two-Station System board
- Optional 494.32 DIO breakout box
- Optional 494.33 DIO power supply

FlexTest 60, 100 & 200

- 493.73 HPU interface board
- 494.74 Dual HSM interface (On/Off or Off/Lo/Hi) (3)
- 494.75 8-Input BNC board
- 494.76 8-Output BNC board
- 494.31 High-Power DIO breakout box with
- 494.33 DIO power supply
- 493.72 Digital I/O interface board
- 493.74 Dual HSM interface board
- 494.49 Quad Encoder interface

Aerospace Structural Testing
- 494.43 Multi Chassis interface board
- 494.79 8-Channel valve driver board

 

FlexTest 40

FlexTest 60

FlexTest 100

FlexTest 200

Configurability

No configuration constraints: Any input can be assigned to any control channel; Control channels can be assigned to any station without changing circuit boards or cables.

Test Stations*

1 or 2

Up to 4 (6 if on/off HSMs)

Up to 8

Up to 8

Control Channels*

Up to 4

Up to 8

Up to 16

Up to 40

Conditioned Transducer Inputs*

Up to 12

Up to 24

Up to 40

Up to 80

Auxiliary Data Inputs*

Up to 16

Up to 32

Up to 64

Up to 96

User Definable Digital I/O

3/3 included

16/16 available

16/16 available

32/32 available

Input on Voltage

2.7-26 VDC @ 0.5 maA minimum

Input Resistance

2 K ohm

Output

30V, 1A maximum

30 VDC, 2A maximum

Maximum System Update Rates*

Standard

Elite Performance

Standard

Elite Performance

Standard

Elite Performance

1-2 Control Channels

6144 Hz

6144 Hz

8192 Hz

6144 Hz

8192 Hz

6144 Hz

8192 Hz

3-4 Control Channels

4096 Hz

4096 Hz

8192 Hz

4096 Hz

8192 Hz

4096 Hz

8192 Hz

5-8 Control Channels

NA

2048 Hz

6144 Hz

2048 Hz

6144 Hz

2048 Hz

6144 Hz

9-16 Control Channels

NA

NA

4096 Hz

2048 Hz

4096 Hz

2048 Hz

4096 Hz

17-32 Control Channels

NA

NA

NA

NA

4096 Hz

2048 Hz

4096 Hz

32-40 Control Channels

NA

NA

NA

NA

NA

1024 Hz

4096 Hz

40+ Control Channels

NA

NA

NA

NA

NA

NA

 4096 Hz 

*Limitations may apply to realize capacities shown

 

 

FlexTest 40

FlexTest 60

FlexTest 100

FlexTest 200

Dimensions (including enclosure)

Height

14 cm (5.5 in)

44.2 cm (17.4 in)

56 cm (22 in)

98 cm (38 in)

Width

43 cm (17 in)

21.6 cm (8.5 in)

37 cm (14.5 in)

60 cm (24 in)

Depth

44.5 cm (17.5 in)

64.8 cm (25.5 in)

66 cm (26 in)

90 cm (35 in)

Weight

8.6 kg (19 lb)

14 kg (31 lb)

45.4 kg (100 lb)

100 kg (220 lb)

 

Power Input

Voltage

Universal input: 100-240 VAC single-phase; 50-60 Hz

Surge current (for 1/2 cycle)

< 40A

< 40A

< 80A

< 100A

Static current at 115 VAC

~ 4A

~8A

~12A

~16A

Static current at 230 VAC

~ 2A

~ 4A

~ 6A

~ 8A

Leakage current

< 3.5 mA

< 3.5 mA

< 3.5 mA

< 3.5 mA

Circuit protection

Short circuit protection by duty cycle fold-back with auto recovery

 

Hydraulic Service Manifold I/F

HSM contact outputs

1.0 A @ 24 VDC

HSM proportional output

20 - 800 mA; 2 or 4 sec. ramp on;
0, 2, or 4 sec. ramp off (selectable)

Only available with 493.74 board: 20 - 800 mA; 2 or 4 second ramp on;
20 - 800 mA; 2 or 4 second ramp on; 0, 2, or 4 second ramp off (selectable)

 

Program Generation

Frequency range

0.001 Hz to 600 Hz; Recommend frequency not exceed 10% of system update rate.

Resolution

32 bit

Waveforms

Haversine, square, triangle, ramp, true sine, random, and sine-sweep

Other

Broad band, frequency-weighted random signal generation; Soft start-stop available on all functions

 

 

FlexTest 40

FlexTest 60

FlexTest 100

FlexTest 200

Valve Drive - 2 Stage

Dual-balance differential current source

Output range

Adjustable full scale up to 100 mA. Compliance voltage = 20 V

Output dither

Amplitude adjustable: 0-50% FS current. Frequency adjustable: 1-4915 Hz

 

 

Valve Drive - 3 Stage

Dual-balance differential current source

Output range

Adjustable full scale up to 100 mA. Compliance voltage = 20 V

Output dither

Amplitude adjustable: 0-50% FS current. Frequency adjustable: 1-4915 Hz

Excitation

Balanced output 100 mA maximum +/- 20 VAC, frequency set to 10 kHz

Input

Differential AC-coupled with adjustable gain and zero

Input-loop controller

Proportional and differential

Digital Universal Conditioner

Primarily for resistive-type or reactive-type transducers

Excitation

Balanced constant-voltage or constant-current, supports 4-wire or 8-wire connections

DC excitation amplitude

1 - 20 V

AC excitation amplitude

1 -10 V peak-peak

Excitation frequency

Selectable: 10, 5, 2.5, 2, or 1 kHz

Gain accuracy

1 -10 V peak-peak

Temperature drift

Selectable: 10, 5, 2.5, 2, or 1 kHz

Interlocks

1 -10 V peak-peak

TEDS support

Compatible with IEEE 1451.4 Class 2

 

Analog Inputs (optional)

Input voltage

+/- 12.5 V

Signal Processing

Input resolution

19 bit with over-sampling

Internal data sample rate

122.88 kHz (simultaneous sample and hold on all analog inputs)

Sample update rate

Simultaneous sample and hold, sampled at update rate: 1024 - 6144 Hz

Signal processing

32 bit floating point

Types

Timed sample, peak / valley, max / min, level-crossing, cyclic / logarithmic, and with ability to tie data channels to a master signal

Digital filters

Bessel, Butterworth, Elliptical

RPC

Time History data acquisition for RPC analysis is available

Format

Data transfer to ASCII, and optionally to MTS RPC format

Digital Transducers

Quadrature (e.g. incremental encoder), SSI (e.g. Temposonics R, absolute encoder, PWM (e.g. Temposonics G)

Analog Outputs (optional)

Output voltage

+/- 10 V

Maximum load

2000 ohm minimum, 1000 pf maximum

Output resolution

16 bit

Environment

Temp: 5-40 deg C; RH: 5-85%

MTS FLEXTEST CONTROLLER BROCHURE

MULTIPURPOSE TESTWARE SOFTWARE BROCHURE

]]> TestSuite Software https://simton.co.th/product/testsuite-software/ Tue, 28 Mar 2023 07:55:05 +0000 https://simton.co.th/?post_type=product&p=3374

Video Product

KEY PRODUCT FEATURES

Easy, Intuitive Use

Graphical display of system for easy limit setting

Accelerated Testing

Virtual Specimen feature saves time in test setup and execution

Powerful

Built-in Iron Python programming language to create and modify tests

Versatile

Modules for designing tests and running the test equipment

MODEL COMPARISON

TestSuiteScreen_668x424
TestSuite TW
  • Used with Criterion and Exceed test systems
  • Can be used with Landmark, Model 311 and Model 322 systems
  • With a ReNew upgrade, can be used with other Universal Test Systems
  • Applications:
    • TW Elite - create, edit and run tests
    • TW Essential - simplified version of TW Elite
    • TW Express - run tests
  • Base, advanced and custom test templates
  • Drag and drop test creation
TestSuiteScreen_TMF_668x424
TestSuite MP
  • Used with Landmark, Acumen, Bionix and other dynamic test systems
  • Applications:
    • MP Elite - create, edit and run tests
    • MP Express - run tests
    • Fatigue, Fracture and Tensile Modules
  • Can conduct static or dynamic tests
  • Standard and custom test templates available
  • Axial and torsional auto-tuning
  • Real-time display of calculated results
  • Visual display of limits
  • Virtual Specimen feature to accurately predict test behavior

TECHNICAL OVERVIEW

Sample of the many Metals test standards that can be addressed using MTS TestSuite TW templates
Standard Description

ASTM E8M

Standard Test Methods for Tension Testing of Metallic Materials

ISO 6892-1

Metallic Materials – Tensile testing at ambient temperature

EN 10002-1

Tensile Testing of Metallic Materials

ASTM E9

Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

ASTM E290

Standard Test Methods for Bend Testing of Material for Ductility

ISO 7438

Metallic Materials – Bend Test

ASTM E21

Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

ISO 783

Metallic Materials – Tensile testing at elevated temperature

ASTM E517

Standard Test Method for Plastic Strain Ratio r for Sheet Metal

ASTM E646

Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet Materials

ASTM A48M

Standard Specification for Gray Iron Castings

ASTM A370

Standard Test Methods for Mechanical Testing of Steel Products

 

Sample of the many Polymer test standards that can be addressed using MTS TestSuite TW templates
Standard Description

ASTM D790

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D412

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension

ASTM D624

Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

ASTM D638

Standard Test Method for Tensile Properties of Plastics

ASTM D695

Standard Test Method for Compressive Properties of Rigid Plastics

ISO 178

Plastics – Determination of flexural properties

ISO 1798

Flexible cellular polymeric materials – Determination of tensile strength and elongation at break

ISO 527

Plastics – Determination of tensile properties

ISO 604

Plastics – Determination of compressive properties

ASTM D882

Standard Test Method for Tensile Properties of Thin Plastic Sheeting

 

Sample of the many Construction Materials test standards that can be addressed using MTS TestSuite TW templates
Standard Description

ASTM A370

Tensile Testing & Bend Testing Steel Rebar

ISO 15630

Steel for the reinforcement and pre-stressing of concrete – Test methods – Part 1: Reinforcing bars, wire rod and wire

ISO 1920-4

Testing of concrete – Part 4: Determination of flexural strength; Determination of tensile splitting strength

ASTM A185/ A185M

Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

ASTM A615M

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

ASTM A82/ A82M

Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

EN 10080

Steel for the reinforcement of concrete. Weldable reinforcing steel

ISO 15630-2

Steel for the reinforcement and pre-stressing of concrete – Test methods – Part 2: Welded fabric

ASTM F606

Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners

 

Sample of the many Polymer Matrix Composite test standards that can be addressed using MTS TestSuite TW templates
Standard Description

ISO 527-4

Tensile Properties of Isotropic and Orthotropic Fibre-Reinforced Plastic Composites

ISO 527-5

Tensile Properties of Unidirectional Fibre-Reinforced Plastic Composites

ASTM D3039

Tensile Properties of Polymer Matrix Composite Materials

ISO 14126

In-plane Compressive Properties of Fibre-Reinforced Plastic Composites

ASTM D6641

Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

ISO 14125

Flexure Properties of Fibre-Reinforced Plastic Composites

ISO 14129

In-Plane Shear Stress/Shear Strain Response of Fibre-Reinforced Plastic Composites

ASTM D3518

In-Plane Shear Response of Polymer Matrix Composite Materials

ISO 14130

Fibre-Reinforced Plastic Composite – Determination of Apparent Interlaminar Shear Strength by Short-Beam Method

ASTM D2344

Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

We can provide pre-packaged templates for a wide array of additional materials, including: textiles, paper products, packaging, adhesives, foam, composites and more.

 

MTS TESTSUITE FATIGUE  FRACTURE BROCHURE

MTS TESTSUITE MP BROCHURE

MTS TESTSUITE TW BROCHURE

]]> Thermomechanical Fatigue (TMF) Subsystem https://simton.co.th/product/thermomechanical-fatigue-tmf-subsystem/ Tue, 28 Mar 2023 07:11:38 +0000 https://simton.co.th/?post_type=product&p=3360

KEY PRODUCT FEATURES

Hi-Temp Capability

Highly accurate and repeatable TMF testing at temperatures up to 1200°C

Pre-Configured Software

TestSuite™ software templates to test to ASTM E2368, ISO 12111 and the European Validated Code of Practice for Strain-Controlled Thermomechanical Fatigue Testing

Easy Setup

Designed for streamlined repeatable testing

Accurate & Repeatable

Air-cooling jets and the induction coil easily reset to original position after changing specimen

FULL PRODUCT INFORMATION

The TMF Subsystem is ideal for inducing thermal cycling in a metallic (magnetically susceptible) specimen. A combination of induction heating and air cooling allows thermomechanical fatigue tests to be performed in or out of phase with a load force. The TMF subsystem has a user-friendly design that helps operators perform repeatable test setup tasks quickly. Air cooling jets and the induction coil have easy, repeatable adjustments, meaning that specimen changes do not require as much setup time to reestablish the initial conditions. A specimen centering tool provides quick initial position for the coil. The coil is mounted on an x, y, z positioner that has manual adjustment knobs with numerical indicators allowing 50 mm of travel in 3-axes for fine positioning relative to the specimen. A quick release slide allows the coil to be easily pulled from the test space with the ability to return to its original position. Air cooling jets are also easily folded back or removed to gain access to the specimen with the same ability to snap back into the original position.

The induction coil is coated in electrically insulating material to provide an additional safety factor against electric shock. The coil, generator and RF oscillator are water cooled and interlocked for water flow. A second interlock specimen thermocouple also provides indication in the event that the primary control thermocouple becomes detached. TestSuite software templates for TMF include test setup, to establish thermal gradients; and test run, to perform and report results on the TMF test.

  • 10 kW RF Generator with temperature controller and secondary temperature interlock controller
  • Air-cooling jets with detachable arms and adjustable flow profiles
  • 10°C/second heating and cooling with higher open loop heating rates possible
  • Temperature range up to 1200°C
  • X,Y,Z coil with position indication and quick release slide-back mount
  • Type K or Type R thermocouple compatibility
  • Water chiller for RF generator and coil
  • Tool kit for coil centering and adjustment
  • Standard 5-turn electrically insulated induction coil
  • TestSuite software templates for setup and test control
  • Instrumented specimen for equipment checkout and validation
  • 16 channel thermocouple data acquisition module
  • Thermocouple connector kit to interface with specimen
  • Designed to accommodate MTS high-temperature axial extensometers

When ordering, please indicate power choice of water chiller 50 Hz or 60 Hz), thermocouple type (R or K).

Maximum Specimen Temperature

1200°C (2192°F)

Typical Heating Rate*

10°C/s (18°F/s)

Typical Cooling Rate*

5°C/s (9°F/s)

Standard Coil Geometry

Custom coils available upon request

» 50 mm (2 in) tall coil with 5 tapered spiral turns

» Includes internal water cooling

Standard Specimen Types

Round

Hollow

Option for internal cooling of hollow specimens**

Standard Specimen Geometry

Minimum Length: 125 mm (5 in)

Diameter: 6 to 12 mm (0.25 to 0.5 in)

RF Generator Power

10 kW

RF Generator Frequency Range

50 to 200 kHz at 10 kVA

Thermocouple Type

K (R optional)

Temperature Control and Interlocks

Two temperature controllers with safety interlocking

» One provides control

» One is for over-temperature

Number of Temperature Monitoring Channels

Up to 16

Coil Adjustment: Maximum Travel of x, y, z Positioner

50 mm (2 in)

Certification

CE/NRTL

*Dependent on specimen material, specimen geometry, and required temperature range.

**Requires modified grips.

MTS SERVICES  ACCESSORIES CATALOG

THERMOMECHANICAL FATIGUE (TMF) SUBSYSTEM BROCHURE

MTS TESTSUITE FATIGUE _ FRACTURE BROCHURE

]]> Model 653 High-Temperature Furnaces https://simton.co.th/product/model-653-high-temperature-furnaces/ Tue, 28 Mar 2023 06:59:56 +0000 https://simton.co.th/?post_type=product&p=3342

KEY PRODUCT FEATURES

Accurate & Repeatable

Capable of achieving temperatures up to 1000°C (1800°F) in validated testing conditions

Easy Setup

User-friendly design that helps operators perform setup tasks more quickly.

Safety Interlocks

Switches shut down the furnace to protect equipment and specimens in the event of a water supply failure.

Versatile

Multiple furnace heights accommodate diverse test requirements

FULL PRODUCT INFORMATION

MTS Model 653 High-Temperature Furnaces are ideal for a wide variety of high-temperature tests, including tension, compression, bend and fatigue testing of metals, composites, ceramics and many other materials. The furnaces have a user-friendly design that helps operators perform setup tasks more quickly – without compromising test quality or accuracy.

Model 653 furnaces streamline test setup and specimen changeover with a clamshell design that allows operators to work from the front of the furnace at all times. This design also improves furnace alignment, which is critical to achieving proper gradients. The durable, low-maintenance insulation for Model 653.03 and 653.04 furnaces comes pre-cut, so there is no need to handle the material in the lab. It fits tighter around the pushrods, reducing heat loss and eliminating the need for wool. The flow switches of the grip water cooling circuit can be integrated with the Model 409 temperature controller, shutting down the furnace to protect the equipment and specimen in the event of a water supply failure.

Model 653.XX Furnace Features

  • Capable of achieving temperatures 1000°C (1832°F) in validated testing conditions
  • Single or multiple zone heating
  • Clamshell design streamlines test setup, furnace alignment, and specimen changeover
  • Silicon carbide heating elements and alumina fiber insulation system for low heat loss and long life
  • Multiple furnace heights to accommodate diverse test requirements
  • Mounting bracket for a variety of MTS load frames is included
  • Designed to accommodate MTS high-temperature axial extensometers

Model 409.83 Temperature Controller Features

  • Multiple mounting options - on included furnace mounting bracket or optional stand for floor or table
  • Compact, ergonomic design
  • Multiple level, self-tuning PID control
  • SCR power relays included
  • Digital communications available.

FURNACES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODEL

 

 

TEMPERATURE

 

MAX / MIN*

 

 

OVERALL

 

HEIGHT

 

 

HOT ZONE

 

HEIGHT

 

 

HOT ZONE

 

WIDTH & DEPTH

 

 

NUMBER

 

OF ZONES

 

 

 

 

 

653.01

 

 

1000°C/100°C

(1832°F/212°F)

 

 

55 mm

(2.2 in)

 

 

19 mm

(.75 in)

 

 

50 x 50 mm

(2 x 2 in)

 

 

1

 

 

 

 

 

653.2

 

 

1000°C/100°C

(1832°F/212°F)

 

 

85 mm

(3.4 in)

 

 

50 mm

(2 in)

 

 

50 x 50 mm

(2 x 2 in)

 

 

2

 

 

 

 

 

653.03

 

 

1000°C/100°C 

(1832°F/212°F)

 

 

126 mm

(5 in)

 

 

90 mm

(3.6 in)

 

 

62.5 x 62.5 mm

(2.46 x 2 in)

 

 

2

 

 

 

 

 

653.04**

 

 

1000°C/100°C

(1832°F/212°F)

 

 

220 mm

(8.7 in)

 

 

185 mm

(7.3 in)

 

 

62.5 x 62.5 mm

(2.46 x 2 in)

 

 

3

 

 

 

 

 

* Temperatures may vary depending on specimen geometry and material.

 

 

** Supports testing to ASTM E606-04e1. BSI 7270, JIS Z2279, AFNOR A03-403 or ISO 12106 requirements.

 

 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THERMAL GRADIENT VERIFICATION KIT COMPONENTS (OPTIONAL)

 

 

PART NUMBER

 

 

 

 

 

 

 

 

Thermocouple Data Acquisition Kit

 

 

 

 

 

 

 

 

100-255-716

 

 

 

 

 

 

 

 

Type K Thermocouple Connector Kit

 

 

 

 

 

 

 

 

100-255-714

 

 

 

 

 

 

 

 

Thermocouple Specimen

 

 

 

 

 

 

 

 

057-743-803

 

 

 

 

 

 

 

 

Thermocouple Welding Kit

 

 

 

 

 

 

 

 

100-256-698

 

 

MODEL 653 HIGH-TEMPERATURE FURNACE BROCHURE

MTS SERVICES ACCESSORIES CATALOG

]]> Model 680 High-Temperature LCF Grips https://simton.co.th/product/model-680-high-temperature-lcf-grips/ Tue, 28 Mar 2023 04:56:22 +0000 https://simton.co.th/?post_type=product&p=3140

TECHNICAL OVERVIEW

Model 680 High-Temperature Grips were expressly designed for high-temperature, low-cycle fatigue testing, but can also be used for other types of tension-compression or tension-only testing. The grip heads and extension rods are constructed of high-temperature, super alloys selected to extend into the heated zone of the furnace, minimizing the thermal gradients within the specimen. Accessories for these grips include a hand pump (required), your choice of buttonhead or threaded specimen adapters, and a water cooling kit.

High-Temperature LCF Grips

Specifications

 

FORCE RATING*

   

DIMENSIONS (SEE PHOTO)

   

MODEL NUMBER

@700°C (1300°F)

@1000° (1832°F)

WEIGHT (EACH)

A

B

C

THREAD SIZE

PART NUMBER

680.01B

15 kip

2 kip

20 lb

1.5 in

4.6 in

4.9 in

43479

044-057-103

680.01B

68 kN

8.9 kN

9 kg

38 mm

117 mm

124 mm

M27x2

044-057-103

*Note: Force rating decreases linearly with temperature between the ratings shown

     

Accessories

TYPE

PART NUMBER

Hand Pump (Required)

100-254-832

Water Cooling Kit, with flow switches

057-697-502

Replacement Seal Kit

040-985-901

 

SPECIMEN ADAPTERS

DIMENSIONS

PART NUMBER

Buttonhead

0.25 in dia. shank,

041-901-902

 

0.75-0.85 in dia. button

 

Buttonhead

0.40 in dia. shank,

041-901-904

 

0.75-0.85 in dia. button

 

Buttonhead

0.50 in dia. shank,

041-901-901

 

0.75-0.85 in dia. button

 

Buttonhead

12 mm dia. shank,

041-901-903

 

21.1-21.6 mm dia. button

 

Threaded

1/2 in-13 UNC-2B

041-901-801

Threaded

M12 x1.75 mm

041-901-802

MTS SERVICES ACCESSORIES CATALOG

]]> Water Cooled High Temperature Extensometers https://simton.co.th/product/water-cooled-high-temperature-extensometers/ Tue, 28 Mar 2023 04:15:31 +0000 https://simton.co.th/?post_type=product&p=3090

FULL PRODUCT INFORMATION

  • Designed for measuring axial strain in high temperature tension, compression, and through-zero fatigue testing applications up to 1200°C (2200°F)
  • Water cooling is more effective at keeping the extensometer body at a constant temperature and reducing noise in the data measured
  • Includes ceramic extension rods that extend into the furnace and minimize rod creep, thermal expansion errors, and conduction losses from the specimen
  • Contact force varies by model. Select from models with 400 g or 780 g contact forces
  • Water cooling required
  • Additional models and rod geometries available upon request
  • Meets or exceeds requirements for calibration according to ASTM E83 Class B1 and ISO 9513 Class 0.5 standards

Metric Units

 

 

 

 

 

 

MODEL NUMBER

GAGE LENGTH

MEASURING RANGE

(% STRAIN)

MAXIMUM

TEMPERATURE

CONTACT FORCE

CERAMIC EXTENSION

RODS INCLUDED

PART NUMBER

632.51F-04

12 mm

+20% / -10%

1200°C

780 g

Qty 2, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter,

85 mm (3.35 in) long

047-402-6511

632.51F-01

25 mm

+15% / -10%

1200°C

400 g

Qty 2, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter,

94 mm (3.7 in) long

047-402-6521

 

 

 

 

 

 

 

US Customary Units

 

 

 

 

 

 

MODEL NUMBER

GAGE LENGTH

MEASURING RANGE

(% STRAIN)

MAXIMUM

TEMPERATURE

CONTACT FORCE

CERAMIC EXTENSION

RODS INCLUDED

PART NUMBER

632.51E-04

0.5 in

+20% / -10%

2200°F

780 g

Qty 2, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter,

85 mm (3.35 in) long

047-402-6501

632-51F-011.00 in+15% / -10% 2200°F400 gQty 2, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter,

94 mm (3.7 in) long

047-402-6531

1 Mount is not required when using with 653.xxB furnace, for other installations contact MTS.

MTS EXTENSOMETER CATALOG

MTS SERVICES ACCESSORIES CATALOG

]]> Air Cooled High Temperature Extensometers https://simton.co.th/product/air-cooled-high-temperature-extensometers/ Tue, 28 Mar 2023 04:03:34 +0000 https://simton.co.th/?post_type=product&p=3080

FULL PRODUCT INFORMATION

  • Designed for measuring axial strain in high temperature tension, compression, and through-zero fatigue testing applications up to 1200°C (2200°F)
  • Includes ceramic extension rods that extend into the furnace and minimize rod creep, thermal expansion errors, and conduction losses from the specimen
  • Contact force varies by model. Select from models with 100 g, 300 g, 400 g, or 780 g contact forces
  • Air cooling required
  • Additional models and rod geometries available upon request
  • Meets or exceeds requirements for calibration according to ASTM E83 Class B1 and ISO 9513 Class 0.5 standards

Detailed Technical Specifications

Metric Units

 

 

 

 

 

 

MODEL NUMBER

GAGE LENGTH

MEASURING RANGE

(% STRAIN)

MAXIMUM

TEMPERATURE

CONTACT FORCE

CERAMIC EXTENTION

RODS INCLUDED

PART NUMBER

632.50F-08

10 mm

+20%/-10%

1200°C

780 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-402-5381

632.54F-11

12 mm

+20%/-10%

1200°C

100 g

Qty 4, V-chisel Edge Rods,

2.0 mm (.0787 in) rod diameter

85 mm (3.35 in) long

047-404-3041

632.53F-1412 mm +20%/-10%1200°C 260 gQty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1041

632.53F-14

12 mm

+20%/-10%

1200°C

300 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1051

632.53F-14

12 mm

+20%/-10%

1200°C

400 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1061

632.50F-04

12 mm

+20%/-10%

1200°C

780 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-402-5391

632.54F-11

25 mm

+10% / - 5%

1200°C

100 g

Qty 4, V-chisel Edge Rods,

2.0 mm (.0787 in) rod diameter

85 mm (3.35 in) long

047-404-3031

632.53F-11 25 mm +20% / -10%1200°C260 g 

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1101 
632.53F-1125 mm  +10% / -5%1200°C 300 g Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1111  
632.53F-11 25 mm  +10% / -5%1200°C400 g Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1121 

632.50F-01

25 mm

+15%/-15%

1200°C

400 g

Qty 2, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

94 mm (3.7 in) long

047-402-5481

 

 

 

 

 

 

 

US Customary Units

 

 

 

 

 

 

MODEL NUMBER

GAGE LENGTH

MEASURING RANGE

(% STRAIN)

MAXIMUM

TEMPERATURE

CONTACT FORCE

CERAMIC EXTENTION

RODS INCLUDED

PART NUMBER

632.54E-14

0.50 in

+20% / -10%

2200°F

100 g

Qty 4, V-chisel Edge Rods,

2.0 mm (.0787 in) rod diameter

85 mm (3.35 in) long

047-404-3021

632.53E-140.50 in+20%/-10%2200°F260 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1011

632.53E-14

0.50 in

+20%/-10%

2200°F

300 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1021

632.53E-14

0.50 in

+20%/-10%

2200°F

400 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1031

632.50E-04

0.50 in

+20%/-10%

2200°F

780 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-402-5251

632.54E-14

1.00 in

+10%/-5%

2200°F

100 g

Qty 2, V-chisel Edge Rods,

2.0 mm (.0787 in) rod diameter

85 mm (3.35 in) long

047-402-3011

 632.53E-111.00 in +10%/-5%2200°F 260 g Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1071
 632.53E-111.00 in +10%/-5%2200°F 300 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long 

047-404-1081 
 632.53E-111.00 in +10%/-5%2200°F400 gQty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

85 mm (3.35 in) long

047-404-1091 

632.50E-01

1.00 in

+15%/-15%

2200°F

400 g

Qty 4, V-chisel Edge Rods,

3.50 mm (.138 in) rod diameter

94 mm (3.7 in) long

047-402-5471

1 Mount is not required when using with 653.xxB furnace, for other installations contact MTS

MTS EXTENSOMETER CATALOG

MTS SERVICES ACCESSORIES CATALOG

]]>