OTHER EXTENSOMETERS – Simton https://simton.co.th จำหน่ายเครื่องมือวัดและทดสอบทางด้านไฟฟ้า และอิเล็กทรอนิกส์ Mon, 05 Jun 2023 03:00:30 +0000 th hourly 1 https://wordpress.org/?v=6.9.4 https://simton.co.th/wp-content/uploads/2026/04/cropped-image-32x32.png OTHER EXTENSOMETERS – Simton https://simton.co.th 32 32 Direct Current Potential Drop (DCPD) Solution https://simton.co.th/product/direct-current-potential-drop-dcpd-solution/ Wed, 29 Mar 2023 09:30:09 +0000 https://simton.co.th/?post_type=product&p=3933

FULL PRODUCT INFORMATION

Integrated Software & Hardware Package Allowing Accurate and Efficient Measurement of Fatigue Crack Growth

Direct Current Potential Drop (DCPD) measures the change in resistance of a specimen, which correlates directly with crack growth. It is an effective way to collect fatigue crack growth data in high-temperature tests and other challenging environments. DCPD is used to overcome the challenges that make contact extensometry and compliance calculations impractical for crack length measurement. Unfortunately, to get the best results, some DCPD solutions require excessive set-up time while others limit flexibility.
 
The MTS DCPD Solution features integrated software and hardware for test control, data analysis, and results reporting. It greatly simplifies DCPD test configuration using the powerful automation tools built into MTS TestSuite software. Integrated into MTS FlexTest 40 Controllers and MTS TestSuite Software, the MTS DCPD solution eliminates the challenges that can arise with non integrated components from multiple suppliers. This provides a convenient and comprehensive way to incorporate DCPD into your material testing programs.
 
This solution uses the reversing DCPD method. By monitoring load and potential (voltage) data from a loaded specimen and a reference specimen, it determines crack length by calculating ratios of potential on both. Applying a calibration equation to the ratios produces the crack length. The current is switched on and off (reversed) to correct for thermocouple effects.

Comprehensive DCPD Solution

This solution offers a comprehensive approach for adding DCPD to your materials testing program. The MTS DCPD Testing Solution includes:

  • High-fidelity MTS DCPD Measurement System (2- or 7-channel configuration)
  • Modular Preamplifier(s)

  • MTS TestSuite™ DCPD Module that supports the 2-channel DCPD system, and includes all test templates, report templates* and calculations for fatigue crack growth assessments. Support for DCPD systems greater than 2 channels is available upon request.

  • MTS TestSuite Multipurpose Analyzer for automated or manual analysis 

  • Setup specimen kit for verifying hardware setup and test configuration
  • Setup, installation and equipment verification by MTS
  • Additional training, consulting and template modifications are available
  • *Solution requires MTS TestSuite MPE or MPX software and Microsoft Excel 2016 or newer to view reports

 

MTS Direct Current Potential Drop (DCPD) Solution

OVERALL

 

Current:

Adjustable 0 - 20 Amps DC Maximum

Voltage:

5 Volts DC Maximum

Gain:

x 5,000 or x 50,000

Gain Accuracy:

0.5% Typical, 2% Maximum

Filter:

50 Hz and 300 Hz

Bandwidth:

300 Hz Maximum

Output:

±10 Volts DC

 

 

MAIN CHASSIS

 

Gain:

1x or 10x

 

 

PREAMP

 

Gain:

5,000x

MTS EXTENSOMETER CATALOG

MTS SERVICES _ ACCESSORIES CATALOG

]]> Extensometer Calibrator https://simton.co.th/product/extensometer-calibrator/ Wed, 29 Mar 2023 09:25:46 +0000 https://simton.co.th/?post_type=product&p=3917

FULL PRODUCT INFORMATION

The Model 650.03 Extensometer Calibrator is a precise instrument designed and built for rugged, long-lasting durability. It gives you freedom from wear; vital for the high accuracy required for precise calibrator verification of high resolution instruments.

The micrometer head has a spindle with a large diameter lead screw to reduce wear and resulting backlash and to provide higher strength and stiffness. Larger mounting diameters reduce the unit stress required in mounting the micrometer head to the frame. The micrometer head is large for easy readability, accurate adjustment, and improved repeatability of gage calibration.

Extensometer Calibrator

650.03 Calibrator frame in fitted case

031-508-302

Required for all

Micrometer head, U.S. customary (0.00005 in graduation)

031-508-205

Required for all, choose one

Micrometer head, Metric (0.001 mm graduation)

031-508-206

Required for all, choose one

  

EXTENSOMETER MODEL

       

CALIBRATOR KITS

632.02

632.03/.05

STANDARD AXIAL (1)

EXTENDED GL AXIAL

632.06

632.06 OPTION 006

632.18/.19/.20

632.29

632.17/.85 AXIAL

632.85 TRANSVERSE

STANDARD HI TEMP AXIAL (2)

632.92, 632.11/12 w/ 632.21 CIRCUMFERENTIAL CHAIN KIT

 

Calibrator Kit, Basic Specimen Adapters

100-049-249

X

X

opt

     

                  X

                X

 

                            X

 

Calibrator Kit, Model 632.03/.05 Knife Edges

100-049-250

X

           

Calibrator Kit, Model 632.02 Knife Edges

100-049-251

X

            

Calibrator Kit, Standard, 12.7 mm (0.50 in), Round Spec.

100-049-270

 

X

X

         

Calibrator Kit, Frame Invert

100-049-252

  

X

X

X

    

 

        X

 

Calibrator Kit, Extended, 12.7 mm (0.50 in), Round Spec.

100-049-253

  

X

         

Calibrator Kit, Dimpled, 9.5 mm (0.375 in) Round Spec.

100-054-156

          

        X

 

Calibrator Kit, 9.5 mm (0.375 in) Round Specimen

100-049-255

 

opt

      

 

opt

  

Calibrator Kit, 3.2 mm (0.125 in) Round Specimen

100-049-256

 

opt

     

                 X

    

Calibrator Kit, Mounting Bracket for Model 632.53/.54

100-054-133

          

        X

 

Calibrator Kit, Model 632.18/.19/.20 Diameteral Extensometers

100-049-258

      

X

     

Calibrator Kit, Displacement Gages

100-049-259

   

X

X

       

Calibrator Kit, Model 632.06 Option 006 Adapter

100-054-796

    

X

       

Calibrator Kit, Model 632.17/.85 Axial

100-049-260

       

 

              X

 

  

Calibrator Kit, Model 632.85 Transverse

100-049-261

        

 

X

  

Calibrator Kit, Model 632.92/.21 Circumferential

100-049-262

          

                                     X

 

Find the model of the extensometer, then follow the column down to determine the kit(s) required to calibrate the extensometer.

1. Standard Axial includes Extensometer models 632.11/12/13/24/25/26/27/31, 634.11/12/25/31 set-up with straight knife edges and attachment for round specimens. Some specific knife edges or attachment kits may require other sizes of specimen adapters. The installation drawing for the extensometer will identify the specimen size range.

2. Standard High Temperature Axial includes 632.53/54 with standard length rods, 632.50/51 with length options 075, 076, 077,078, 079 and 080. Calibration requires rods with either conical point (with Dimpled Specimen) or V-chisel rod end geometry (with optional 9.5 mm round).

 
                        

 

MTS EXTENSOMETER CATALOG

MTS SERVICES _ ACCESSORIES CATALOG

]]> Displacement Gages https://simton.co.th/product/displacement-gages/ Wed, 29 Mar 2023 09:21:28 +0000 https://simton.co.th/?post_type=product&p=3894

FULL PRODUCT INFORMATION

  • Versatile design measures specimens, fixtures, shafts. or the movement of any other component during a test
  • Designed for use where small deformations must be measured such as bend tests or tests with unusual geometries
  • Over-travel protection included:  Gage arm releases if it travels too far or when a side load is applied and Gage arm can be reset without changing the body position
  • Comes with an adjustable mounting block
  • Displacement measurements can be made with the gage in contact against a specimen or an active component in the force train

Displacement Gages

Metric Units

 

 

 

 

 

 

TEMPERATURE RANGE

MODEL/OPT

TRAVEL

ZERO ADJUST

FORCCE AT ZERO

HEIGHT

LENGTH

MIN/MAX

PART NUMBER

632.06H-2x / --

±4 mm (±0.16 in)

8 mm (0.30 in)

150 g

101 mm (4 in)

101 mm (4 in)

 

632.06H-20

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-501

632.06H-23

 

 

 

 

 

-100°C / 175°C (-150°F/ 350°F)

047-400-503

632.06H-3x/ 001

±2 mm (±0.08 in)

8 mm (0.30 in)

150 g

101 mm (4 in)

101 mm (4 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-504

632.06H-33

 

 

 

 

 

-100°C / 175°C (-150°F/ 350°F)

047-400-506

632.06H-3x/ 002

±1 mm (±0.04 in)

8 mm (0.30 in)

250 g

101 mm (4 in)

69 mm (2.7 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-507

632.06H-3x/ 003

±6 mm (±0.25 in)

8 mm (0.30 in)

150 g

101 mm (4 in)

101 mm (4 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-510

632.06H-33

 

 

 

 

 

-100°C / 175°C (-150°F/ 350°F)

047-400-512

632.06H-3x/ 004

±8 mm (±0.32 in)

8 mm (0.30 in)

100 g

101 mm (4 in)

140 mm (5.5 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-513

632.06H-3x/ 005

±12.5 mm (±0.50 in)

8 mm (0.30 in)

80 g

101 mm (4 in)

190 mm (7.5 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-516

632.06H-31

 

 

 

 

 

-270°C / 65°C (-452°F / 150°F)

047-400-517

632.06H-33

 

 

 

 

 

-100°C / 175°C (-150°F/ 350°F)

047-400-518

632.06H-3x/ 006

±25 mm (±0.50 in)

8 mm (0.30 in)

35 g

101 mm (4 in)

343 mm (13.5 in)

 

632.06H-30

 

 

 

 

 

-100°C / 150°C (-150°F / 300°F)

047-400-519

632.06H-31

 

 

 

 

 

-270°C / 65°C (-452°F / 150°F)

047-400-520

MTS EXTENSOMETER CATALOG

MTS SERVICES _ ACCESSORIES CATALOG

]]> Clip-On Displacement Gages https://simton.co.th/product/clip-on-displacement-gages/ Wed, 29 Mar 2023 09:13:13 +0000 https://simton.co.th/?post_type=product&p=3876

FULL PRODUCT INFORMATION

  • Double cantilever displacement-type gages are primarily used in fracture mechanics testing, KIC, JIC, crack growth and R-curve determination
  • Compatible with a variety of specimens including compact tension, WOL, round compact tension, C-shaped, bend, and other common specimens or panels
  • Useful for measuring the displacement of components and specimens with odd geometries, performing elongation studies, and testing pipes, bars and rods
  • Can be immersed in a wide variety of non-conductive fluids without special precautions
  • Can use Model 632.02 Clip-On Gages when testing to ASTM E399
  • Model 632.03 gages are our most accurate clip-on gages featuring improved slot geometry and three-point contact knife edges. Options are available with longer travel for J-integral and crack growth tests
  • Replacement knife edges available upon request
  • Additional models available, contact your sales representative for more options

Clip-On Displacement Gages

Metric Units

 

 

 

 

 

 

 

MODEL/OPTION

GAGE LENGTH

TRAVEL

MAXIMUM FREQUENCY

COMPRESSED FORCE

HEIGHT/LENGTH

TEMPERATURE RANGE MIN/MAX

PART NUMBER

632.02F-2x

5 mm

+3 / -1 mm

50 Hz

2500 g

30.5 / 48.3 mm

 

 

632.02F-20

 

 

 

 

 

-100°C / 150°C

047-400-104

632.03-2x

12 mm

4 mm

100 Hz

2500 g

 

 

 

632.03F-20

 

 

 

 

 

-100°C / 150°C

047-400-204

632.03-3X

 

 

 

 

 

 

 

Option 001

2 mm

4 mm

 

 

 

-100°C / 150°C

047-400-310

Option 002

2.5 mm

4 mm

 

 

 

-100°C / 150°C

047-400-311

632.65E-0315.74 mm+10/-1.0 mm10 Hz200 g 1000°C max 

US Customary

 

 

 

 

 

 

 

MODEL/OPTION

GAGE LENGTH

TRAVEL

MAXIMUM FREQUENCY

COMPRESSED FORCE

HEIGHT/LENGTH

TEMPERATURE RANGE MIN/MAX

PART NUMBER

632.02E-2x

0.2000 in

+0.100 / -0.05 in

50 Hz

2500 g

1.2 / 1.9 in

 

 

632.02E-20

 

 

 

 

 

-150°F / 300°F

047-400-101

632.03E-20

0.475 in

0.15 in

100 Hz

2500 g

 

 

 

 

 

 

 

 

 

-150°F / 300°F

047-400-201

632.03E-3X

 

 

 

 

 

 

 

Option 001

0.075 in

0.15 in

 

 

 

-150°F / 300°F

047-400-301

Option 002

0.10 in

0.15 in

 

 

 

-150°F / 300°F

047-400-302

632.65E-03600 in+0.400 / -0.040 in10 Hz200 g 1800°F max 

MTS EXTENSOMETER CATALOG

MTS SERVICES _ ACCESSORIES CATALOG

]]>