Monitor dynamic properties vs. time or fatigue cycles.

• Samples specified force, length, and phase relationship of input signals
• Calculates and displays (9) critical properties: K*, K’, K”, Phase, Tan Delta, Damping, Total Energy, displacement, and load amplitude
• Supports limit checking to trigger appropriate actions

Requires

• 793.10 Multi-Purpose TestWare (MPT)

MODEL 793.17 SOFTWARE BROCHURE

Easy-to-use software designed to increase your efficiency in both production quality testing and laboratory testing.

• Conduct simple dynamic characterization, static deflection and conditional quality tests with single channel control on machines rated to 400 Hz.
• Trend-line analysis features include the use of X-Bar charts and customizable Western Electric process control rules that ensure a deliberate response to trend deviations and enable operators to proactively respond to data deviations
• Provides advanced users the ability to define numerous test attributes:
  • User access levels
  • Frequency sweeps without delays between frequency increments
  • Analysis methods for calculating static and dynamic test results
  • Size and position of graphs and tabular run-time test results
  • Digital input / output capabilities for integrating directly into a manufacturing cell for manual, semi-automated or fully automated testing
• Generates reports to display test results

793.30 SOFTWARE BROCHURE

Conduct dynamic characterization of viscoelastic materials or components under a wide range of variables with up to four channels of simultaneous control.

• Measure Dynamic Stiffness (K), Phase Angle, Damping (C), Modulus (E or G), Tan Delta
• Perform characterizations as a function of frequency, dynamic amplitude and mean level on systems with a single dynamic channel
• Sweep single variables to obtain mean level, dynamic amplitude, frequency, temperature, or phase relationship between channels of control
• Combine multiple sweeps in one test
• Perform characterizations as a function of phase between the dynamic channels on systems with more than one dynamic channel. 
• Perform characterizations as a function of temperature set point
• Includes automatic measurement and correction of system dynamic errors induced by transducers and electronics

Requires

• 793.03 Calculations with Outputs
• 793.05 Amplitude Phase Control
• 793.10 MultiPurpose TestWare (MPT)

793.31-32 SOFTWARE BROCHURE

Add sine-on-sine and pulse waveform capability to 793.31

• May be used as a stand-alone package
• Perform characterizations as a function of fundamental mean level, fundamental and harmonic frequency, and fundamental and harmonic amplitude using sine-on-sine waveshape
• Perform characterizations as a function of fundamental base level, fundamental and pulse frequency, and pulse amplitude
• Provides dynamic control of a single channel containing a force transducer (load cell) and a linear variable displacement transducer (LVDT)
• Provides limited control of additional static channels, including temperature control and monitor channels

Requires

• 793.03 Calculations with Outputs 
• 793.05 Amplitude Phase Control
• 793.10 MultiPurpose TestWare (MPT)

793.31-32 SOFTWARE BROCHURE

Characterize the elastomeric stiffness properties of materials and components.

• Create three fundamental test types: Tensile, Tensile-Compressive, Compressive
• Characterize the specimen behavior as a function of a constant application rate of load or displacement
• Conduct the test between predefined load or displacement end levels with independent definitions of a precondition phase and a data acquisition phase
• Calculate stiffness values as chord modulus or tangent modulus during the loading or unloading portion of the test or as an average of the two
• Calculations can also be done on the “Initial Segment” where part transitions from a rest period after dwell period
• View the test graphics in real time to evaluate the test
• Automatic displacement error correction due to frame stiffness deflection

Requires: 

• 793.10 MultiPurpose TestWare (MPT)

793.33 SOFTWARE BROCHURE

Characterize the elastomeric stiffness properties of materials and components.

• Create three fundamental test types: Tensile, Tensile-Compressive, Compressive
• Characterize the specimen behavior as a function of a constant application rate of load or displacement
• Conduct the test between predefined load or displacement end levels with independent definitions of a precondition phase and a data acquisition phase
• Calculate stiffness values as chord modulus or tangent modulus during the loading or unloading portion of the test or as an average of the two
• Calculations can also be done on the “Initial Segment” where part transitions from a rest period after dwell period
• View the test graphics in real time to evaluate the test
• Automatic displacement error correction due to frame stiffness deflection

Requires: 

• 793.10 MultiPurpose TestWare (MPT)

793.35 SOFTWARE BROCHURE

Conduct tests that search for a specimen’s resonant frequency.

• Apply a constant amplitude frequency sweep to reveal the natural frequency of the test article
• Multiple frequency sweeps in each test allow you to improve resolution of your results
• Measure the transfer function between the actuator LVDT and the output accelerometer
• Patented phase and amplitude control algorithm adjusts test inputs to specimen response
• Plot a transmissibility curve
• Frequency is limited by load unit resonance and data acquisition rate

Requires

• 793.10 MultiPurpose TestWare (MPT)
• Resonance Search Kit; Series 831 - Accelerometer Assembly with electronics

793.37 SOFTWARE BROCHURE

Design and apply waveforms that represent service conditions

• SINE-on-SINE Process superposes two sinusoidal waveforms
• PULSE Process produces a mixed mode pulse that separates the offset control mode pulse producing control mode
• Typically used in durability test applications when a periodic pulse is needed, such as rolling wheels, paper processing or engine valves

Requires

• 793.10 MultiPurpose TestWare (MPT)

Setup a test system for use with Remote Parameter Control (RPC) software

• Edit and analyze time histories
• Calculate system models
• Efficiently develop drive files
• Define and execute durability tests

Requires

• 793.72 Time History Playout & Acquisition software 

COMPONENT RPC SOFTWARE BROCHURE

Easily generate master curves to gain insight into the temperature-dependent properties of viscoelastic materials

• Leverage the Time-Temperature Superposition (TTS) principle by using Williams-Landel-Ferry (WLF) model calculations
• Determine temperature-dependent mechanical property behaviors far beyond a lab’s physical testing capabilities  - out to MHz or even GHz frequencies

HIGH-FORCE DMA BROCHURE

Use the Model 836 to conduct realistic, accurate durability testing in six degrees of freedom.

• Low-friction actuators mounted within a compact, stiff, self-reacting base provide high-fidelity control and bandwidth
• Superior control compensation ensures data integrity and repeatability
• Perform multiple tests on the same machine without changing the setup
• Quickly install and remove test articles with the easy-access mounting assembly

Primary Applications

• Durability Testing

Use the robust Model 834 High-Force Elastomer Test System to test a variety of elastomeric materials, components, and mounts used in high load applications.

• Apply forces up to 100 kN at frequencies up to 300 Hz (50 kN, 150 kN, 250 kN frame ratings also available)
• Superior control compensation ensures data integrity and repeatability
• Versatile T-Slot Bed
• ­Shown with MTS Model 651.06E-03 Environmental Chamber: A complete integrated subsystem for performing tests in the temperature ranges of -129 degrees C to +315 degrees C.

Typical Applications

• Durability Testing
• Typical applications include trucks, construction, forestry, agricultural equipment, railway cars and aerospace

Use the Model 833 system to conduct dynamic characterization and durability testing in three degrees of freedom.

• Automated control compensation ensures data integrity and repeatability
• Designed to minimize stiffness variations as a function of frequency
• Achieve close to zero phase angle using an MTS patented control algorithm
• Test specimens up to 400 mm diameter and 550 mm tall - with or without a chamber

Primary Applications

• Dynamic Characterization
• Durability Testing

Use the Model 832 System to qualify bushing service life or conduct dynamic torsional characterization tests

• Configurable in 2-4 degrees of freedom
• Dynamic radial and torsional inputs with static offset about the bushing axis
• Increase system utility with optional hardware for dynamic inputs - conical and cardonic rotation about the radial axis or static conical input about the normal axis
• Single Axis Torsional Characterization Package includes MTS Model 663 torque transducer rated to +/- 550 Nm and MTS 793.31 Dynamic Characterization Software
• Multi-Axis Configuration: Static Conical about Normal Fixture imparts 10 degrees static conical offset to the bushing
• Anti-rotate about Radius Axis prevents undesired rotation of the vertical actuator

Primary Applications

• Durabilty Testing
• Dynamic Torsional Characterization (x-axis)

Characterize materials and components at high frequency with static pre-load in off axis.

• Massive, robust and reliable design engineered for high frequency operation and low force/displacement resolution.
• Acceleration compensation is built into the force measurement system.

Primary Applications

• Materials Research
• Component Development

Mx, My, Mz outputs provided for moment monitoring

Characterize materials and components at medium to high frequency.

• Dedicated models available to meet your test frequency requirements.
• Acceleration compensation is built into the force measurement system.

Primary Applications

• Materials Research
• Component Development

From the Landmark family of universal test machines, specifically configured for accurate, resonant free testing to 200 Hz.

• Force capacities of 15 kN or 25 kN.
• Free-standing, self-supporting unit that requires no special foundation.

Primary Applications

• Materials Research
• Component Development
• Universal Tensile & Compression Testing

MTS LANDMARK 200 SYSTEM BROCHURE

From the Landmark family of universal test machines, specifically designed for requiring minimal space.

• Force capacities of 15 kN or 25 kN
• Resonant free testing to 100 Hz.
• Table Top Model lending itself to be integrated into automated test environments

Primary Applications

• Materials Research
• Component Development
• End-of-line Production Testing
• Universal Tensile and Compression Testing

MTS LANDMARK 100 SYSTEM BROCHURE

From the MTS Acumen family of electro-dynamic test systems, specifically designed for elastomer testing.

• Force capacities of 1, 3, and 12 kN
• Minimal facility requirements due to electric actuation

Primary Applications

• Materials Research
• Component Development
• End-of-line Production Testing
• Universal Tensile Compression Testing

MTS ACUMEN SYSTEM BROCHURE

MTS Elastomer Testing Solutions are commonly provided with a complete integrated sub-system for performing tests with temperatures ranging from - 40 deg C to +150 deg C (- 40 deg F to +300 deg F). Temperatures for these system are programmable from the FlexTest workstation and typically feature:

• Insulated chamber – frame-mounted with hinged door
• Windowed door for test article viewing during test
• Mechanical refrigeration with liquid nitrogen boost capability
• Insulated boot attached to specimen adapter for better environmental seal
• Remote mounted mechanical temperature conditioning unit connected to the specimen enclosure by large diameter insulated flexible tubes

SERIES 651 ENVIRONMENTAL CHAMBER BROCHURE